PM862K02
ABB PM862K02 AC 800M Redundant Controller Unit, 67 Mhz, 32 MB Memory, with Dual CPU Configuration.
Overview
Description
The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface. The base plate of the PM862 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool. The controller supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interfaces and S800 I/O). Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.
Key Benefits
- ISA Secure certified
- Reliability and simple fault diagnosis procedures
- Modularity, allowing for step-by-step expansion
- IP20 Class protection without the requirement for enclosures
- The controller can be configured with System 800xA Control Builder or Compact Control Builder
- The controller has full EMC certification
- Sectioned CEX-Bus using a pair of BC810 / BC820
- Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)
- Built-in redundant Ethernet Communication ports
Specifications
- Product Type
- AC 800M Redundant Processor Unit
- Article number
- 3BSE081636R1 (PM862K02)
- Redundancy
- Yes
- High Integrity
- No
- Clock Frequency
- 67 Mhz
- Performance, 1000 boolean operations
- 0.18 ms
- Performance
- 0.18 ms
- Memory
- 32 MB
- RAM available for application
- 23.521 MB
- Flash memory for storage
- Yes
Variant
- Processor type
- MPC866
- No. of applications per controller
- 32
- No. of programs per application
- 64
- No. of tasks per controller
- 32
- Flash PROM for firmware storage
- 4 MB
- Power supply
- 24 V d.c. (19.2-30 V d.c.)
- Power consumption +24 V typ/max
- 210 / 360 mA
- Power dissipation
- 5.1 W (8.6 W max)
- Redundant power supply status input
- Yes
- Built-in back-up battery
- Lithium, 3.6V
- Event queue in controller per OPC client
- Up to 3000 events
- AC 800M transm. speed to OPC server
- 36-86 events/sec, 113-143 data messages/sec
- I/O clusters on Modulebus with non-red. CPU
- 1 electrical + 7 optical
- I/O capacity on Modulebus
- Max 96 (single PM862) or 84 (red. PM862) I/O modules
- Modulebus scan rate
- 0 - 100 ms (actual time depending on number of I/O modules)
- Ethernet channels
- 2
- Ethernet interface
- Ethernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole)
- Control Network protocol
- MMS (Manufacturing Message Service) and IAC (Inter Application Communication)
- Recommended Control Network backbone
- 100 Mbit/s switched Ethernet
- RS-232C interface
- 2 (one general, 1 for service tool)
- RS-232C interface (COM3) (non red. only)
- RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support
- RS-232C interface (COM4) (non red. only)
- RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS support
- Hazardous location
- cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X
- Temperature, Operating
- 0 to +55 °C (+32 to +131 °F)
- Protection class
- IP20 according to EN 60529, IEC 529
- CE Mark
- Yes
- ISA Secure certified
- Yes
- Width
- 119 mm
- Height
- 186 mm
- Depth
- 135 mm
- Weight (including base)
- K01 1200 g / K02 2900 g